Skip to content
Tresca
MCP serverCommunity

lgx-mcp

Analyses Logix .L5X exports offline, reads and writes live tags over EtherNet/IP behind gates derived from the project, and can stage rung edits through the Logix Designer SDK.

InstallRepository Checked 19 Nov 2026

What it's for

lgx-mcp drives a running copy of Studio 5000 on Windows, macOS and Linux. Its documentation describes 5 capabilities and 4 limitations, summarised below.

What it can do

  • Opens .L5X projects to summarise them, find tags, draw rungs, cross-reference, trace where a value comes from, diff projects, lint and document.
  • Reads and polls live tags over EtherNet/IP with libplctag, which needs no Rockwell licence.
  • Decides which tags may be written from the open project; tags written by logic, Safety_ tags and undesignated tags are refused, and each decision names the L5X element behind it.
  • Checks interlocks statically and compares the project against what is on the controller.
  • With your own Logix Designer and SDK, exports projects and proposes, tests, builds and finalises rung edits.

Limitations

  • The author has tested it only against FactoryTalk Logix Echo, Rockwell's emulator, not a physical controller.
  • The README says it is not a safety system. Live writes are off unless LGX_ENABLE_LIVE_WRITES=1 is set, and each SDK action needs its own opt-in.
  • .ACD files need the SDK lane; otherwise export to .L5X first. Partial exports give no write gate.
  • The SDK lane is Windows x64 only and needs your licensed Logix Designer and SDK.

AI-generated models, drawings and results must be checked by a qualified engineer before use.